Please leave us your Screaming Eagle Quick Install Adjustable Pushrod reviews for Harley Davidson motorcycles below.
Screaming Eagle Adjustable Pushrods
MSRP: $164
Avg. Rating: 
Description : SCREAMIN’ EAGLE® PREMIUM TAPERED QUICK-INSTALL ADJUSTABLE PUSHRODS
These premium pushrods are tapered for enhanced clearance at the cylinder head, allowing the use of higher lift cams. The one-piece chrome moly tube adds rigidity and durability, and the threaded adjustment feature provides easy cam installation without removing the cylinder heads or rocker boxes. To simplify adjustment, the tube features six flats, with one flat marked with a large dot for tracking the adjustment. The threaded rod features 4 flats to reduce wrench swing. Each pushrod features the Screamin’ Eagle logo and is marked for “Intake” or “Exhaust”. Kit includes 4 pushrods and required pushrod tubes. 18404-08 $164.95 Fits ’99-later Twin Cam equipped models.
Buy On Ebay
The MSRP on the Screaming Eagle Adjustable Pushrods is approximately $164 dollars but check out the deals below and see how much money you can save shopping online. If you want to thank us, come back and leave your review of the SE Adjustable Pushrods at the bottom of this page.
No items matching your keywords were found.
Buy on Amazon
If you prefer to buy your online products at Amazon then that's ok, we've got that covered too. Check out the SE adjustable pushrods for Harley Davidson bikes available right now on Amazon.
Specs
SELECTING A CAMSHAFT
The intake closing point relative to bottom center listed in the table can be used as a
general indicator for the shape of the torque curve. Earlier intake closing values will
result in higher torque at low engine speeds (along with lower horsepower at higher
engine speeds). Later intake values will result in higher horsepower at high engine
speeds (along with lower torque at low engine speeds).
Intake Closing
(deg ABDC)
Less than 30° Early intake closing indicates a low speed torque cam.
30° – 50° Medium intake closing indicates a mid-range torque cam.
Greater than 50° Late intake closing indicates a high speed power cam.
Intake closing values are just one indicator of the shape of the torque curve. Camshaft
lift and duration along with the cylinder head‘s port size and flow, engine displacement,
compression ratio, and throttle size also play a roll in the shape of the torque curve.
