Please leave us your Screaming Eagle SE-264 Camshaft reviews for Harley Davidson motorcycles below.
Screaming Eagle SE-264 Cam
MSRP: $299 (late) $269 (early)
Avg. Rating: 
Description : The Harley Davidson Screaming Eagle SE-264 CAM KIT This cam is designed around large displacement and high RPM engines. This cam should be used with high compression, performance heads, and open intake and exhaust. This is our highest power cam when used with 110+ and CNC ported heads. For race application only. 25133-04 $269.95 Fits ’99-’05 Dyna®, ’00-’06 Softail® and
’99-’06 Touring models. 25476-06 $299.95 Fits ’06-later Dyna, and ’07-later Softail and Touring models. *CAUTION: Requires use of Screamin’ Eagle Valve Spring Kit and appropriate Screamin Eagle Pushrods for installation and to ensure proper clearance. Failure to comply may result in engine damage.
Buy On Ebay
The MSRP on the Screaming Eagle SE-264 Cams is approximately $299 dollars but check out the deals below and see how much money you can save shopping online. If you want to thank us, come back and leave your review of the SE-264 Cams at the bottom of this page.
US $199.00
Buy on Amazon
If you prefer to buy your online products at Amazon then that's ok, we've got that covered too. Check out the SE-264 Cams for Harley Davidson bikes available right now on Amazon.
Cam Specs
SELECTING A CAMSHAFT
The intake closing point relative to bottom center listed in the table can be used as a
general indicator for the shape of the torque curve. Earlier intake closing values will
result in higher torque at low engine speeds (along with lower horsepower at higher
engine speeds). Later intake values will result in higher horsepower at high engine
speeds (along with lower torque at low engine speeds).
Intake Closing
(deg ABDC)
Less than 30° Early intake closing indicates a low speed torque cam.
30° – 50° Medium intake closing indicates a mid-range torque cam.
Greater than 50° Late intake closing indicates a high speed power cam.
Intake closing values are just one indicator of the shape of the torque curve. Camshaft
lift and duration along with the cylinder head‘s port size and flow, engine displacement,
compression ratio, and throttle size also play a roll in the shape of the torque curve.
